Element / Tresco

Hex Lag Bolts are commonly used with bed hardware. Features a deep thread design for maximum holding power. Rubber head covers can be used on lag bolts for protection in shipping and installation. Order bolt and cover separate.

Sold per bolt

Sold per cover

Sold each

• D01P

• 50 pieces combinable in 10 piece lots

• Pozi Drive

• Torx/Star

Sold each

Sold each

The low-profile flextape allows for use in many discrete locations. Instantly add lighting to a project of almost any design, no matter how unusual it may be. Comes with a strong 3M adhesive backing that allows easy mounting virtually anywhere. High output with an average rated life of 50,000 hours. Low heat, long life and dimmable. 3 watt is cuttable every 7/16 inch. Easy press-on connectors. 1.5 watt, supply.

Sold per foot

FlexTape

"COB" FlexTape

Sold each

• FLSMD 3 watt, and 4.3 watt FlexTape is 3/8 inch wide and 3/32 inch high. Must be used with a 24V DC power

curved illumintated top Bold lighting for bright applications, achieve consistent, seamless illumination from start to finish with Neoloop, flexible silicone LED lighting. Shatterproof and watertight, top-emitting Neoloop illuminates from a curved top and bends on a vertical axis, ideal for architectural accents such as under countertops, soffits or toe kick lighting. 290 Lumens per foot. Small profile allows recess mounting on both sides of a 3/4" panel.

Sold per roll

Sold each

• MINI power ports for easy installation. Indicator light changes from green to red, signaling potential
• power supply damage. 60W and 96W PowerSync power supplies feature a 5-amp terminal block,
• supporting higher-wattage applications for enhanced reliability and performance. A/C power cord can be
• cut and shortened, for a tidy tailored installation. (Unplug the cord before cutting)
• PSPLG-24V36W
• 24 VDC constant voltage output. High power factor (PF>0.95). Built-in hardwire compartment. All metal
• construction. Short circuit protection. Overcurrent protection. Overload protection. Automatic reset (no
• fuses). RFI protection. Dimmable by standard LED wall dimmers. Class 2. Requires electrician to install.
• PSPLG-24V96W Dimensions .9H x 2.5W x 18L.

Our OptiPockit puck lights are available in a variety of configurations. Whether recessed or surface-mounted, Tresco has the perfect puck for you. The OptiPockit DM (dimmable) can be dimmed with our FREEDiM controllers, in-line dimmers for plugin applications and aftermarket dimmers for hardwired power supplies. Recess mount with nickel, black and white trims or surface mount with

Sold per light

Sold per ring

Sold per light

• Pockit ® PLUS LED Lights
• 1.5 watt, 25,000 hour life
• Power Pockit ® LED Lights 3 watt, 50,000 hour life
• Warm, 3000K
• Cool, 5000K
• Power Pockit ® LED Lights 5 watt, 50,000 hour life
• Warm, 3000K

Tresco's Equiline Puck series now comes with 3 watt LEDs and a more contemporary milk-style lens, wider beam spread, and has eliminated the dotted LED "hot spots" on reflective surfaces. Recess mounted (Drill a 2 1/4" dia. hole.)* with surface 1/2" mount ring available. Applications include cabinets, furniture,

Sold per light

• 25,000 hours of life with 2 year warranty. Must be connected to a 12V. DC power supply.
• Warm, 3000K
• Cool, 5000K

Sold per ring

• *Available while supplies last.

Long and narrow, the FineLine is the easy way to provide smooth, linear lighting almost anywhere. The FineLine's three lengths offer a wide range of installation options. The longest length exceeds the industry benchmark by spanning farther than other "stick" type products. Typical applications include cabinets, shelving, countertops and showcases. Features a frosted diffuser for perfect, even illumination and offers direct fixture-to-fixture linking capabilities without gaps or dark spots. Mounts with a simple U clip. Two mounting clips and a 79" starter cord included. The optional In-Line touch dimmer attaches directly to the lights and offers 4 steps - Low/Medium/High/Off. See page 72 for power supplies.

Sold per light

Fineline 2.0 Lights (330 Lumens per foot) 50,000 hour life

Sold per cord

• SMPHO

Three DIFFUSER Options The patent-pending SimpLED combines several industry firsts that expand lighting solutions including the (packaged with each light) new three-in-one system of diffuser options that are packaged with each light: clear, frosted or milk/opal countertops, etc. The SimpLED comes in three lengths and quickly mounts with U clips or screws. Includes starter cord and linked connector with each light. Can be linked back to back or with link cords. These lights are Diffuser options, you can easily select output. 3/4" wide and 3/8" thick and are very bright. Use with DC power supplies listed on page 74. To further expand the SimpLED lighting capabilities, refer to the optional Inline Control Modules listed below.

Sold per light

SimpLED 2.0 Lights (470 Lumens per foot) 50,000 hour life

SimpLED Lights (350 Lumens per foot) 50,000 hour life

Sold per cord

• Frosted Milk/Opal which determines the light's glare/reflection and intensity. Typical applications include cabinets, shelving,
• Control Modules are available: SimpLED 12 V Linking Cords

There are three different control modules available for the SimpLED lights to plug into the end of a run. These control modules can also be positioned in another location and used with other LED lights if you add the SimpLED Adapter cord. They have a maximum capacity of 27 watt.

Sold each

Sold per cord

• These adapter cords allow for the use of above listed SimpLED control modules with all 12V LED lights.

The Eurolinx flat profile blends with any application using specialized diffuser and reflector technology to achieve Luniform output, this European styled light is a perfect choice for all contemporary and high-end commercial applications. At 4W per foot and over 200 lumens, Eurolinx is a top pick for high illumination. Features a sleek, contemporary European design (1 3/16"w. x 5/16"t.) with a two beam spread and is dimmable. Comes with starter cord, mounting clips and back-to-back connector. 50,000 hour usable lamp life.

Sold per light

Sold per dimmer

Sold per cord

• *Available while supplies last.

Bold lighting for bright applications, achieve consistent, seamless illumination from start to finish with Neoloop, flexible silicone LED lighting. Shatterproof and watertight, top-emitting Neoloop illuminates from a curved top and bends on a vertical axis, ideal for architectural accents such as under countertops, soffits or toe kick lighting. 200 Lumens per foot.

Sold per roll

Sold each

End Cap

• Top-Emitting: curved illumintated top Neoloop DIY Accessories
• bendable on the vertical axis
• L-N2-LNK**-1

Bold lighting for bright applications, achieve consistent, seamless illumination from start to finish with Neoloop, flexible silicone LED lighting. Shatterproof and watertight, side-emitting Neoloop illuminates from the side and bends on a horizontal axis, a perfect solution for adding light to dark millwork, creating unique wall designs, outlining commercial logos and more. 100 Lumens per foot.

Sold per roll

Sold each

• Side-Emitting: flat illumintated side
• bendable on the horizontal axis

The most flexible LED lights on earth! It's low-profile allows for use in many discrete locations. Instantly add lighting to a project of almost any design, no matter how unusual it may be. Comes with a strong 3M adhesive backing that allows easy mounting virtually anywhere. High output with an average rated life of 50,000 hours. Low heat, long life and dimmable. 1.5 and 4.4 watt is cuttable every 2 inches. 3 watt is cuttable every 1 inch. Easy screw-on connectors. 1.5 watt, 3 watt 4.4 watt and 5.5 watt FlexTape is 3/8 inch wide and 3/32 inch high. Must be used with a 12 V DC power supply.

Sold per foot

FlexTape

FlexTape

FlexTape

FlexTape

EquiLine Tape

COB Flextape

• Available Colors: 25,000 hours vs. 50,000 hours on FlexTape, plus a standard 3M adhesive vs. a strong 3M adhesive backing
• Warm White, Cool
• White, Daylight, on FlexTape. Equiline Tape LED is not available in red, green or blue.
• Red & Blue.
• Must be mounted on aluminum extrusion.
• warm white, neutral white, cool white and daylight.
• Available while supplies last.

Starter Cords (to connect FlexTape or EquiLine Tape to power supply)

Sold each

with casework to provide dramatic ambient light. Pressure fit this extrusion into a routed channel 7/16" deep No End Caps

Sold per extrusion

• FLTPE-BTB-DFE This extrusion is meant for channels that go the entire width or height of casework. Integrates seamlessly
• Profile x 3/4" wide. No end caps required. Comes with a milk diffuser and uses standard FlexTape, and FlexTape
• 7/16" starter cords, linking cords and connectors.

The innovative, patent pending LED aluminum extrusion system. Simply choose your style, cut to desired length, add FlexTape and diffuser or film, and assemble to create a customized LED fixture. Available in light at 30° angle . Curved : Surface mounted using magnets, U-Clips, or screws. Recessed : Grooved sides allow extrusion to press fit into place with or without end cap. Round : U-Clip mounting allows fixture to be rotated in 15° increments either direction. (30°, 15°, 0°, -15°, -30° ) Square : Surface mounted using magnets, U-clips, or screws. Ask about available colors on extrusions.

Sold per extrusion

Sold per connector

Additional handling charges apply. Refer to page 282 for freight rates.

• XFL72-SC 5 profiles with an array of installation options. Angled : For corner mounting with screws only. Directs
• Oversize package charge applies. Refer to page 286 for freight rates.
• Round Square *Available while supplies last.

Sold per diffuser

Additional handling charge applies. Oversize package charge applies. Refer to page 286 for

Sold per set

Sold per cord

Sold per set

• X72-DBF
• X72-DIFF-FR freight rates.
• **To be used on square, curved, round and angled extrusions only.
• Recessed extrusion uses standard FlexTape starter lead.
• XRNDECP Linking Cords Black White XSQRECP
• #One U-Clip /magnet is recommended for every 1' of extrusion.
• *Available while supplies last.
• XLNK-XX-BL
• XLNK-XX-WH
• XRND-UCLP
• XSQRSWCLP

These 12V DC power supplies are equipped with mounting blocks that allow easy snap-in connections and include a standard 110/120V cord and plug. Features short circuit and overload protection (automatic reset), 12V DC output and are dimmable on trailing edge. The 30 and 60 watt power supplies feature a disconnect on the trailing end for integrating in-line dimmers. The 6 and 15 watt power supplies are dimmable by adding an additional mounting block.

Sold each

Will need to purchase PWADP-12N20-MLT6-DFE to use with Amp Connector lights.

• XRM42-155

These light blocks are an excellent option when running multiple LED lights from a single extension. Have room for 6 lights and feature a slender body making it easy to mount in a variety of places.

Sold each

New Style Light Block Extension

• TRANS-MNT-BLT PWCON-12MLT-DFE
• PWADP-12N20-MLT6-DFE

Control up to 11' of lights with these sensors. Can be recess or surface mounted. 1/2" diameter, 2 3/8" length. Available in black or nickel. 1. Door Sensor Controller: Door open - light on; Door closed - light off. 3. Touch Dimmer Controller: Touch on/offand 0-100% dimming control. (Hold finger down for dimming.)

Sold per controller

• RSDS-BL LED-OVLDS 2. Motion Controller: Turns on when human motion is detected.
• RSMOT-NI-1 LED-OVLTD

These dimmers feature radio-frequency, remote-control dimming to adjust lights from anywhere in the room

Sold per dimmer

• up to 30 feet. Controls up to 60 watt of LED lighting, provides on/offpower and dims lights from 100 - 1%.
• Features a built-in memory that recalls the last setting when turned on and come with two remote controls. The
• universal dimmer can control multiple dimmers in the same room.

A 48 watt capacity dimmer with 100 - 0% dimming and on/offpower. The 79" input lead snaps into the power supply mounting block and an 8" output connects to a run of lights.

Sold per dimmer

Sold per switch

Sold each

• Puck Light Jig listed on page 184.

Free yourself from cumbersome, expensive hardwire installation of traditional wall dimmers with the new FreeDiM Series of wireless remotes and dimmers from Tresco Lighting. This innovative new line of wireless low voltage controllers gives you the power to turn on, off, or dim your lights from anywhere in your home. This collection contains an array of styles ideal for commercial displays, closets, drawers, shelves and cabinet applications.

Sold per receiver

• Multiple receivers can be used on a single power supply or within a room to achieve multiple zones of
• control. Features 60 W capacity and power fail memory. Works with 12V and 24V systems.

These wireless dimmers can be programmed to multiple receivers for more lighting control. Controls all Tresco dimmable low voltage lights with a 65 ft. range of control from the dimmer to receiver. Can easily

Sold per dimmer

• be removed from the docking tray to replace batteries or use as a remote dimmer. Available in single or
• 2-zone in 3 finishes.

This single zone wireless dimmer has a 65 ft. range of control and can control all Tresco dimmable low voltage lights. Features integrated magnet for mounting to refrigerator or other metallic surfaces, or can be screw mounted. Comes with a long life lithium battery that can easily be replaced. Available in 2 finishes.

Sold per dimmer

Now an independent control of three or six lighting zones from a single remote. Program additional receivers to separate the lighting in a room into multiple zones that can be controlled independently, and set and save brightness levels of all zones. Controls all Tresco dimmable low voltage lights with a 65 ft. range of control. Features integrated magnet for mounting to refrigerator or other metallic surfaces, or to docking tray. Docking tray can be screw mounted.

Sold per remote

Sold per station

• with interchangeable face plates (Black and Nickel). Maximum load capacity = 1 port x 2.1 Amp or 2 ports x
• 1.05 Amp. Draws 10 W at maximum capacity while charging and has an auto shut off. Comes with 79" cord.

Sold per cord

• 1 1/4"

• *Available while supplies last.

Freedim wireless door sensors can be mounted inside a door without a connecting wire directly to the lights. One door sensor can connect up to 4 of the Door Sensor Receivers so a large area can be controlled from an individual door.

Sold per sensor/receiver

• TL-PWCON-12SXT-96-DFE

• PWADP-12N2O-DFE WLDS-NI

These dimmable power supplies work with all Tresco 12V DC dimmable LED fixtures. No minimum load requirements. All units are hardwire into and include a 6 snap mounting block on the output.

Sold each

These dimmers work with the dimmable power supply listed above. Features more reliable dimming performance than standard dimmers. HED technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs. Available as a large paddle switch or on/offrocker switch. Both are for a standard designer wall plate opening.

Sold each

This starter kit includes all the tools and accessories needed to install lighting in any room. Includes 2 mounting blocks, a 50' roll of Class 2 white wire, 10 AMP connectors, AMP extractor, screwdrivers, 10 barrel connectors and wire management clips, drill bit and VHB tape. All in a 15" canvas bag. Class 2, 16-gauge wire is the minimum for in wall applications. A licensed electrician should be consulted for wiring through walls and other permanent structures. When mounting and wiring a light system, follow all local and national electrical codes.

Sold per kit

Sold each

Sold per bag

• *Available while supplies last.

The Tresco's Pockit ® 120V lights are a true plug-and-play lighting solution. Allows for easy "jumping" over and around obstacles without the need for an electrician and can be recessed or surface mounted. Recess mount requires a 3 1/4" dia. hole. Dimmable by standard LED wall dimmers listed below. Can easily be used to retrofit existing fluorescent display lights that will provide high illumination at a fraction of the energy cost. Trim Kit and 10' starter cord included with each light. Linkable up to 10 lights. 25,000 hours lamp life.

Sold per light

The smaller version of the popular Pockit ® 120V linkable series. Produces 25% more light output than the traditional halogen and xenon puck lights. Surface or recess mounted by drilling a 2 3/8" diameter hole. Dimmable to 50% by standard LED wall dimmers. Linkable up to 15 lights. 30,000 hours lamp life. Pockit

Sold per light

Sold per cord

• 7/8" 120-M 4 watt lights do not come with a starter cord. Order starter cords separately as listed below.
• (22mm)
• 3 1/4"
• (83mm) Warm, 3000K
• 3 5/8"
• Warm, 3000K

Sold each

Sold each

These dimmers work with the dimmable power supply listed above. Features more reliable dimming FPOC-HWB-ADP-BL FPOC-HWB-ADP-WH performance than standard dimmers. HED technology with advanced dimming circuitry designed for compatibility with most high-efficiency light bulbs. Available as a large paddle switch or on/offrocker switch. Both are for a standard designer wall plate opening.

Sold each

• *Available while supplies last.

Sold each

PCM38 Instant on, instant brightness, no hum or flicker. The T5 LED strip light produces even light throughout the length of the fixture. Works great for displays, office furniture, cabinets and shelving, and back lighting on commercial, industrial or residential projects. Lights are linkable up to 150W or 10 fixtures and include mounting clips, all connectors and a 6' starter cord. Optional hardwire box and linking cords are available. T5 Trescent 30,000 life hour lights are non-dimmable, available in black and white with warm white output.

Sold per light

• AN02
• T57W, T514W,

1 11/16" (42.5 mm)

Sold each

Sold per cord

• Hole size, if needed:
• 3/4 in.
• 19 mm

Light up your work area with Tresco's Double T5. Features a low profile with 2-10,000 hour fluorescent tubes in cool white. Comes with an 8 ft. starter lead and is linkable from unit to unit. 120V will not need a transformer. Available in black only.

Sold per light

• **Available while supplies last.

Sold per cord

My Tidy Space Drawer Outlets are specifically designed to be your most space efficient drawer outlet choice. Custom face plate only requires 2 5/8" internal drawer box height. Efficient tri-folding arm design only requires 10 1/2" unobstructed width. Smooth operation makes for great compatibility with soft close guides. Safe Design includes tamper proof outlets, non conductive material, and ETL listed to UL 926A and CSA 22.2. Comes with a 5' power cord and a 2 year warranty. Compatible with drawer box thickness from 1/2" to 11/16". Compact requires 1 5/8" between the back of the drawer and the front of the cabinet back. Low profile requires 2 1/8" between the back of the drawer and the front of the cabinet back. Standard 15A outlets. 20A is available. Please inquire.

Sold per outlet