Tapes / Adhesives

Superior performing professional Painters masking tape. Offers clean removal from difficult surfaces, has excellent conformability and resists paint bleed-through. This tape replaces the traditional #212 (tan) masking tape.

Sold per roll

Special adhesive provides resistance to leaving glue behind for up to seven days after being applied. Controlled paper backing allows conformability. An excellent masking tape for the professional looking paint job.

Sold per roll

A utility duct tape used in bundling, sealing and holding applications. Provides good weather and moisture resistance for mending vinyl cushions, canvas boat covers, plastic tarps, etc.

Sold per roll

A general purpose crepe masking tape with rubber adhesive. A good choice for masking non-critical jobs. Very cost effective.

Sold per roll

A general purpose masking tape for basic applications.

Sold per roll

• Available while supplies last.

A utility duct tape used in bundling, sealing and holding applications. Provides good weather and moisture resistance for mending vinyl cushions, canvas boat covers, plastic tarps, etc.

Sold per roll

Cost-effective masking for covering large areas. Fast and easy application using the Hand Masker Dispenser. Used for masking windows, doors, cabinets, floors, etc. Works well in cabinet interiors for paint and varnish over spray.

Sold per roll

Applies masking tape to masking film in one continuous application. Compact and light weight. Applies pre- folded masking film with masking tape in one easy step. Saves time when preparing for painting, etc.

Sold each

System complete with plastic drop cloth pre-taped with #2090 Long Mask masking tape. Can be dispensed by hand. Simple and easy to use.

Sold per roll

A strong, pressure sensitive tape. Holds securely and conforms to surfaces for a consistent, uniform seal. Resistant to bursting and center seam splitting. Gives packages a neat professional appearance.

Sold per roll

A heavy duty packaging tape similar in strength to #375 Scotch heavy duty box sealing tape.

Sold per roll

• T901350

An economical medium to light duty box sealing tape for those not-so-heavy packages.

Sold per roll

• #371

The adjustable braking feature applies tension to the tape to prevent slipping, twisting or wrinkling. For rolls up to 2" wide on a 3" core.

Sold per dispenser

Translucent polyester film backed reinforced with glass yarn filaments. Provides medium duty tensile strength,

Sold per dispenser

• unitizing applications.
• Hand-held, light weight yet a rugged construction with built-in serrated blade. For rolls up to 1" wide on 3" cores.

A heavy duty polypropylene tape. Ideal for packaging medium to heavy loads. Works great for bundling wood mill work. Stretches over 30% before breaking, yet snaps back to hold tightly. Resistant to sharp edges and leaves no adhesive residue when removed.

Sold per roll

Protect items during shipment and storage with single-faced cardboard on rolls or with single wall or double wall sheets.

Sold per roll

Sold per sheet

walled Continuous length corrugated cardboard tubes in rolls for packaging trim and molding. "Prescored" corners makes the tube open up easily into a square configuration. Rolls can be mounted so you can pull off, measure and cut to desired length. To close the ends, just oversize in length, flip the end back and tape shut. Available in 2 sizes.

Sold per roll

Cardboard rolls, tubes and sheets shipped only via FOB origin, Freight Collect or Prepay and Add truck

Sold per marker

• Tubes Industrial Markers
• Micro-measure ink valve action marker guarantees perfect flow. Permanent, instant drying ink.

Polypropylene strapping is manufactured using the latest technological developments. Produced with the excellent recovery are only a few of the characteristics of this strapping. An ideal choice for light and medium duty packaging needs. Meets all requirements for machine and manual applications.

Sold per coil

Sold each

• 309016B highest standards to obtain consistent quality and a high degree of reliability. High strength, good elongation and

Polyester strapping is manufactured to the same standards as Polypropylene strapping. Polyester has less stretch than polypropylene, making it better suited for heavy duty applications such as bundling plywood.

Sold per coil

Sold each

A premium heavy-duty banding cart with a tension adjust feature. Includes a tray for storing clips, tensioner and sealer. Works with 1/2" or 5/8" banding.

Sold per cart

Oversized package charge applies. Refer to page 286 for freight rates.

Bundle packages fast with stretch wrap. Stretches to wrap, tightens to hold. Sticks only to itself. Easy to remove.

Sold per roll

• Q-Premium

Sold each

• ASB1218

Add quality protection when moving or shipping furniture and cabinets. This quality pad is a Black/Gray woven cloth pad with a 1" zig-zag quilting pattern. Imported.

Sold per pad

Shipped only FOB Arthur, IL. Contact us for freight cost or refer to page 286 for shipping rates on Furniture Pads.

Non-abrasive, light-weight, shock absorbing foam protects delicate items. Provides light cushioning and surface protection, keeps products clean and mark free and is moisture resistant. Perforated every 12" for easy tear off.

Sold per roll

Works against squeaks caused by friction and helps to relieve sticking and freezing. Inhibits rust and corrosion, resists moisture, reduces friction on cutting tools and impedes buildup of glues, waxes, inks, paint, etc. Contains no petroleum oils.

Sold each

A multi-purpose cleaner that will dissolve and flush away dirt, grease, tar, most non-curing type adhesive fills, and similar substances. A citrus oil base cleaner that emulsifies when flushed with water. Can be used to clean and degreasw almost any dirty or greasy surface.

Sold each

• *Not for sale to the states of CA, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, VA.

Bostik GlideCote™ is the perfect addition to your shop. Maximize your tool's longevity with Bostik GlideCote™ 10.75 oz Aerosol. Designed for woodworkers and professionals, this high-performance spray reduces friction and prevents rust, ensuring smoother cuts and enhanced tool efficiency. Ideal for table saws, planers, and other woodworking tools, GlideCote™ helps minimize wear and tear, resulting in longer-lasting equipment and reduced maintenance costs. The easy-to-use spray formula protects surfaces, reduces drag, and improves overall tool performance. Compared to the more traditional paste wax used for this purpose GlideCote is 30% slicker and easier to apply. Contains no petroleum oil or silicone and will not stain wood or interfere with finishes and glues.

Sold each

Reduces friction, inhibits resin build-up and prolongs tool life. Contains no silicone and will not affect wood nishes. Ideal product to use on table tops, workbenches or saw tops to create slick working surface.

Sold each

A high strength, fast, contact-type adhesive. Fast contact strength build up. Needs only 1 to 2 minutes drying time. Excellent adhesive for decorative laminates, particleboard, and many other materials.

Sold each

• *Not for sale to the state of CA.

An industrial grade, high strength, fast grabbing contact adhesive. Bonds, laminates, metals, plastics and rubber. Lace spray, variable width patterns.

Sold each

• *Not for sale to the state of CA.

A high tack, high coverage, fast drying, transparent adhesive for permanently attaching foils, carpeting, light weight foams, paper, cardboard, felt and cloth to painted or unpainted metals, wood, hardboard and other base materials.

Sold each

• *Not for sale to the state of CA.

GREENGUARD ™ certified, water-dispersed, high-strength contact adhesive. Has high coverage, a long bonding range, and good heat resistance. Can be used to bond foamed plastics, plastic laminate, wood veneer, and canvas, as well as postforming operations. Coverage is dependent upon porosity of the substrate and the method by which the adhesive is applied. One gallon may cover approximately 680 sq. ft. when adhesive is applied by spray or roller on wood, particle board or high pressure laminates. More adhesive is recommended for very soft wood, fabrics and foams, or if adhesive is applied by brush.

Sold per gallon

GREENGUARD ™ certified, solvent based, high strength, post-formable contact adhesive. Self-contained pressurized cylinder helps simplify many applications. #94 CA adhesive has a two surface bonding range from 1 to 30 minutes.

Sold per cylinder

• Note: Various adhesives available in mini and large cylinders including #30NF and #90 high strength. Ask about
• a complete listing on adhesives and spray equipment.

1. Also available in red.

Electrically-heated pneumatic applicator dispenses a neat bead of adhesive with the squeeze of a trigger. Easy to use and maintain. Adhesives available with a wide range of properties including for adhesions to heat sensitive substrates to difficult-to-bond jobs. Available with a choice of open times and viscosities, depending on the application and adhesive. Adhesive is a one-component, moisture cured, 100% solids and will not attack plastics. With an applicator and a variety of Scotch-Weld (PUR) Adhesives, you have hot melt speed with structural adhesive benefits for bonding a wide range of substrate combinations such as wood to wood, MDF, PVC, glass to wood, and much more.

Sold each

Product Description Application Viscosity @ Open Set Tensile 250015 - Fast set time - Bond wood and selected plastics 250° F 7,000 1.5 15 3,900

Sold per cartridge

• Temperature 250° F (cps) Time Time Strength
• (Min.) (Sec.) (PSI)
• (121° C)
• 250060 - Medium set time - Bond wood and selected plastics 250° F 7,000 2 60 4,200
• TE100 - Extrudable with medium set time - Bond wood and 250° F 7,000 2 60 4,200
• Open Time: This is the maximum time between the application of the adhesive and when the parts must be joined together.
• This information is based on 1/8" bead and non-metallic substrates at 75° F (20° C).
• Set Time: Also known as fixture/clamping time. This is the minimum amount of time required for the adhesive to solidify and
• hold the parts together (able to hold a tensile load of 5 psi).
• Note: 3M Scotch-Weld PUR Adhesives are available for bonding a variety of substrates and in various speed-of-
• set time. Accessories and replacement parts are available for the Applicator.

3M Hot Melt Adhesives and Applicators are advanced handheld systems to help improve productivity and lower costs. Adhesives are 100% solids thermoplastic resins that become fluid when heated and quickly wet the bonding surface. They cool, harden and reach bond strength in seconds. 3M Hot Melt Adhesives and Applicators are available for a variety of applications from low to high melt for low to high volume usage. Ask about the availability of Hot Melt systems not listed. 3M-25567 AE II LT is a low volume applicator using low melt adhesives. 3M-96594 AE II is a low volume applicator using standard melt adhesives

Sold per applicator

Excellent "hot tack", fast setting for corrugated, beadboard, repack. Economical, general purpose. Use with AE II LT applicator only.

Sold per pound — approximately 15 glue sticks

• Multi-purpose for wood, coated paper, polyolefins and other heat sensitive materials.
• Use with AE II LT applicator only.
• Low viscosity for high flow rate, increased production. Good hot tack, quick grab for packaging and woodworking.
• Use with AE II applicator only.

Titebond Original Wood Glue has been used by leading furniture manufacturers, craftsmen, and do-it-yourselfers for more than 30 years. It features a quick, strong initial tack, and fast speed-of-set. Creates a bond stronger than the wood itself. Has an excellent sandability, is solvent and heat resistant, safe to use, nontoxic, and nonflammable.

Sold per container — Call for quote on skid quantity.

Professional strength formula ideal for general woodworking applications. Strong initial tack, fast set, excellent sandability and dries clear.

Sold per container

An ideal adhesive for edge and face gluing where superior heat resistance and sandability is desired. Provides longer open time than original Titebond.

Sold per container — Call for quote on skid quantity.

Contains all of the characteristics of Titebond Original plus Type II water resistance. Resists solvents, heat, and water. Sands easily without softening. Is specifically formulated for wood, paper, cloth, hardboard, parti- cle-board, and most other porous materials.

Sold per container

Titebond III is the best performing Titebond wood glue and is ideal for both interior and exterior. Offers superior strength, longer open time, lower application temperature, and resists solvents, heat, mildew and water. Titebond III is especially useful for outdoor applications in cooler temperatures and where moisture is a concern. Water cleanup and non-toxic

Sold per container

Carries the same qualities as Titebond II but with a dark "chocolate milk" color that provides better color blending on stained applications.

Sold per container

A florescent version of Titebond II. Provides the same strong initial tack and fast speed of set. Excellent sandability and is unaffected by finishes. Fluorescent wood glue contains a dye that, when viewed by a black light, enables woodworkers to inspect the glue line and assist in the cleanup process. Is easy to use and cleans up with water.

Sold per container

• *Available while supplies last. Suggested replacement: Titebond Speed Set.

An excellent option when you need something beyond the ordinary. This glue is 3X thicker then Titebond Original and dries 2X faster. Dries clear and retains flexibility to improve impact resistance. Designed for wood but also adheres well to pottery, ceramics, stone, fabric, glass and most "craft type"materials

Sold per container

A fast set glue with excellent strength. Twice the speed of Titebond Original and has more strength. Heat resistant and sands easily. Glue line is visible under a Black light to improve glue line removal.

Sold per container — Call for quote on skid quantity.

• Available while supplies last.

A versatile glue designed for bonding wood and other porous substrates to synthetic materials such as melamine, vinyl, HPL and metals. Offers fast initial tack, yet has a long enough open time to allow for accurate alignment. Water based, non-flammable, has low odor, dries clear, and cleans up with water.

Sold per container

• *The replacement for Wood Stik Vinyl Glue we had in years past.

Add a pump to your 1 gallon or 2 gallon glue containers for easy dispensing. Pump features an end cap to prevent glue from drying out.

Sold per pump

Sold each

A simple efficient 2 gallon reservoir with a rolling glue applicator. No power needed. Can glue up to 7 1/2" wide. Lid seals tightly to keep glue fresh when not in use. Durable stainless steel construction. Made in USA. The glue roller replacement cover kit allows for a change of the sandpaper cover on the roller and includes all the pieces needed for two replacements. Step-by-step instructions included.

Sold each

• A AD-GLUEMASTERL Glue Applicator Rolls Left to Right

Versatile, easy to use solvent base adhesive. Handles practically every job in construction, remodeling, or repair. (Not for use on tub kits or Foam board.) Bonds wood, paneling, hardboard, metal brick, fiberglass, and other common building materials.

Sold each

An advanced, 100% silicone formula that will not corrode metals. Provides a weather-resistant, water-tight seal around windows, doors, skylights, flashing, gutters, and vents. Heat-resistant and flexible--will not crack or become brittle with age.

Sold each

Titebond Instant Bond is a two-part bonding system that takes between 5-15 seconds to set and 30-60 seconds for initial cure. Provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is very effective on a wide variety of materials and substrates. Long shelf life, superior quality, incredible strength, and easy to use. Instant Bond Activator is designed for immediate bonds and reduces set and cure time by nearly 50%. Available in four viscosities. Jet Black has 15% longer working tine than standard.

Sold each

Mohawk Instant adhesive for maximum bonding strength. The thin version wicks into tight places where flowing into and under is essential. Medium and Heavy are for semi smooth surfaces. Non whitening activator accelerates curing time. De-bonder removes unwanted or excess glue. Glue any combination of wood, naugahyde, plastic, veneers, cardboard, rubber, ceramics, leather or vinyl. No clamping, instant set.

Sold each

Sold per pkg/each

• Designed by Craftsmen for Cabinetry and Millwork Professionals. This is a water free and trouble free adhesive
• delivering full strength in 30 minutes. Repositionable for up to 3 minutes. Dramatically cuts assembly and
• clamping times. Accepts most stains and finishes. RapidFuse is the perfect family of adhesives for all assembly
• and bonding applications.

A latex base formula for quick, easy repairs of chips, holes and cracks in wood. Excellent sandability and holding power. Can be stained or painted. Nonflammable formula cleans up with water and soap before drying. Comparable to Original Titebond Wood Filler that is now discontinued.

Sold each

• WFM16Z

Famowood Wood Filler has been the choice of professional woodworkers for over 70 years. Famowood wood filler is a premium wood filler product made from real wood. It will not crack or shrink, and can be sanded and drilled. Easy to stain or paint. This wood filler is solvent based and can be used in interior or exterior applications. Clean-up and thinning requires solvent. Recommended thinner: Lacquer Thinner.

Sold per container

Famowood's latex based wood filler offers the same outstanding performance of Original Famowood, but has very low odor and can be cleaned up with water.

Sold per container

A premium grade, solvent free filler that sets firmly on all wood surfaces. Mohawk wood filler offers minimal shrinkage and will not crack or fall out, is quick drying, sands easily and accepts most stains and finishes. Ideal for edge veneering and grain filling.

Sold per container

Sold per 1,000 (m)

• Case Bag of Bag of

A better and faster way to insert spaceballs. Just pull the trigger and a spaceball is inserted instantly. EZ Ball operates on 40-150 psi compressed air and is warranted against manufacturer's defects for 6 months. One model will work in all grooves from .210" up to .250". Canister holds 1000 1/4" Spaceballs. Spaceballs must be coated with a very light film of talcum powder or fine sawdust to prevent jamming. Talcum powder included with Spaceball Inserter.

Sold each

High quality flexible PVC, with notches for ease of bending around corners. Holds panels and glass in place by press-fitting in a .125" x .25" groove between the panel and the frame.

Sold per foot

• *Translucent - Allows for use with any stain color and painted colors.

Slotting Cutters can be used to slot door frame for our panel retainer extrusion. Cuts 1/4" deep. Includes arbor, bearing, and slotting cutter. See specifications.

Sold per cutter

• *For above slotting cutter. 1/8" carbide tipped 3-flute slotting cutter.

Solid wood half round tambour for desks, appliance garages, etc. Our stock tambours have a 1 1/2" wide lead rail at one end for hand pull. Up to 2 1/2" lead rail available at no extra charge. Bonded on cloth backer. Additional species available upon request.

Sold per tambour

• Above tambours in stock. Tambours available in numerous wood species not listed, including
• quartersawn white oak and alder. Available in all sizes. Allow for 3 week delivery of non-stock