Screws / Fasteners

Flat Head - Flat top surface with a countersunk bearing surface. Pan Head - Flat bearing surface, a semi-elliptical top surface, and cylindrical side surface. Truss Head - Low profile semi-elliptical top surface with flat bearing surface. countersunk bearing surface. Round Washer Head - Built-in washer provides a larger bearing surface. Fillister Flat Top Pan Head - Flat top pan head design allows for a deeper recess and optimum bit engagement. Modified Truss Head - Low head profile, larger load bearing surface. Undercut - Head designed to seat properly in undersized countersink holes. Phillips - Most common recess used in woodworking. Phillips-Slot - Available with standard and metric machine screws. Robertson ® Square - Increasing in popularity due to more positive holding while driving. Recex ® - Square Phillips combination drive allows positive driving and aftermarket serviceability. Star Drive - Provides twice the torque of Phillips and Square Drive, reduces camout and end load.

• No.1
• No.1 T-20
• No.2
• No.2 T-25
• No.3 No.3 T-30

#8 x 1 #8 x 1 These deep thread screws feature self-countersinking nibs under the head that carve away the material and a Type 17 self-drilling point that practically eliminates splitting and bursting in most species of wood and man-made materials. These screws minimize the need for pre-drilling and eliminate the need for pre-countersinking. Carton

Sold per m (1000)

• Carton
• **Note: These screws are without nibs. **Note: These screws are without nibs.
• BL Carton BL

The deep thread design on these screws provide maximum holding power in a variety of different woods and man- made materials. Excellent holding power in particleboard, MDF and even in plastic composites. Phillips recess features extra depth to help minimize bit slippage. Square drive provides maximum bit fit and helps eliminate driver bit camout. The Recex® Square-Phillips combination recess insures you always have the correct driver bit to install or adjust your finished project. Predrilling is recommended .

Sold per m (1000)

• Carton

FEATURES a patented serrated tooth thread which requires less driving force and reduces splitting. Rapid starting point out performs type 17. Recex® Recess is a square/phillips combination designed for installation with a square screwdriver but can be adjusted with either a square or phillips screwdriver. Carton Box

Sold per m (1000)

• Bulk Mini
• L Carton L Box

An excellent general purpose fastener for professional operations and demanding industries using hard or soft woods, chipboard and other tough materials. The Star Drive recess provides twice the torque of Phillips and Square Drive, reduces camout and end load. Features aggressive underhead cutting nibs (on flat head) for self-countersinking and deep, wide, sharp threads with spiral notches that cut through fibrous materials. Also features Type 17 notched point that starts the screw quickly, reducing the need for pre-drilling, and a knurled shank (on flat head) which reduces drag on shank and driving tool. This is a high quality, heat treated and hardened steel, gold zinc coated screw. Additional sizes available upon request. Ask for a full line BIG TIMBER catalog. Carton GZ

Sold per m (1000)

• Carton

The same general purpose fastener as the above Gold Star screws except that in addition to interior use, they can also be used for exterior operations using hard or soft woods, chipboard or other tough or treated materials. The hardened steel with triple ceramic coating provides 1200-hour corrosion resistance in both ACQ and salt spray conditions. Sizes and lengths not listed are available upon request. Carton Qty

Sold per m (1000)

• Carton BC Carton BC Qty

Extra large washer head screws, commonly used for attaching and adjusting drawer front to drawer box.

Sold per m (1000)

• Bulk Mini Carton Box

For attaching decorative hardware to drawer box or door.

Sold per m (1000)

• Break-Away -with breaks at 3/4", 1 1/4" and 1 1/2".

Sold per m (1000)

• Note: #6 x 5/8" truss head screw does not feature type 17 point. ** Note: #6 x 5/8" truss head screw does not feature type 17 point.
• Bulk Mini Carton Box

Low Truss Head for use with ball bearing drawer slides, and ball bearing swivels. Bulk Mini

Sold per m (1000)

Unique head, designed to seat properly in smaller diameter countersunk holes. Used mainly with European style drawer slides.

Sold per m (1000)

BB AE Flat Head Phillips Deep Thread

Sold per m (1000)

• ZC NI Carton NI Carton **In stock in bulk cartons. See column on left.
• Most hinge screws are available in larger bulk quantities. Ask for quote.
• ZC NI ZC Carton ZC BB AE
• Additional handling charge applies. Refer to page 286 for freight rates.

Use with Pocket Hole Jigs and machinery where styles and rails are screwed together rather than doweled. Type 17 point is self-drilling to eliminate wood splitting and pre-drilling. Bulk Carton Mini Box

Sold per m (1000)

• Bulk Mini Carton Box Fillister head, HiLo thread type 17. Superior holding strength in all species of wood and man-made materials.
• Bulk Mini Carton Box Bulk Mini Carton Box Bulk Mini Carton Box L Carton L Box Bulk Mini L Carton L Box Bulk Mini L Carton L Box