Finish Equipment / Supplies

Arthur Design Coatings, Inc. is a full line KREMLIN finish equipment Distributor. KREMLIN offers the most efficient production spray technology available in the world today. KREMLIN covers the whole range of AIRMIX ®, FLOWMAX ® and CYCLOMIX ® technologies, offering a wide range of pumps and spray head equipment for the protection of wood and metal, whether applying stains, lacquers, polyurethanes, adhesives or almost any other coating for production or touch-up projects. Look to KREMLIN for high performance. Ask about an equipment demo! Arthur Distributor Co also stocks a complete line of KREMLIN repair parts for pumps and spray guns. You can order by part number referring to your parts breakdown to rebuild your equipment, or we offer complete rebuilds and cleanings at our repair shop. Fast turn around times on equipment we stock. EOS excels over previous pumps with balanced stroke fluid section (steady out-put, less pulsation), closed lubricating cup, special treated stainless steel wetted parts and larger valves and seats. The EOS pumps from lower (6 PSI) to higher pressures to cover from stain applications to top coats with higher viscosities. (5000 cps) Much simpler designs with fewer parts. Complete systems come with all fluid hoses, 5 gallon suction rod, superior Xcite Airmix spray gun and wall mount bracket, or tri-pod floor stand. Cart is optional.

Sold per system

Sold per gun

• New sensations for superior performances. The Xcite™ spray gun, innovation second to none, delivers
• outstanding reliability, 86% transfer efficiency and an unsurpassed finish quality. HVLP compliant. Improved
• goes green with cleaner booth environment, lower solvent emissions and lowest energy consumption of any
• two-component, high solids and also adhesives. Nothing compares to Airmix ® .

• Fluid Output Spray Angle and Maximum Fan Width at 10" (25cm)
• 500 psi 1000 psi 10° 18° 30° 40° 45° 50° 60° 67° 75° 82° 90°
• 35 bar 70 bar 3.5" 5" 7" 9" 9.5" 10" 12" 13" 15" 18" 22"
• oz/min cm 3 /min oz/min cm 3 /min 9 cm 13 cm 18 cm 23 cm 24 cm 25 cm 31 cm 33 cm 38 cm 46 cm 60 cm
• 140 (4) 140 (4)
• 85 (6)
• 70 (8)
• 60 (12)
• Standard Tips - To order a tip, replace the crosses in 134-5xx-xx4 with the

Sold per tip

• corresponding number from the chart above. (Example: 134-506-094 for a 06-09 tip)
• Xtra Tips - To order a tip, replace the crosses in 134-5xx-xx2 with the corresponding 04-03 04-05 04-07 04-09 04-11
• number from the side chart. (Example: 134-506-092 for a 06-09 tip) 06-03 06-05 06-07 06-09* 06-11* 06-13 06-15
• Special Order Tips - These tips require a minimum of 25 tips per order and these 09-03 09-05 09-07 09-09* 09-11* 09-13 09-15
• tips cannot be ordered in the Xtra™ tip style. 12-07 12-09* 12-11* 12-13* 12-15 12-17
• Optimum Fan Adjustment - These tips allow for fan adjustment when used with a 14-05 14-07 14-09 14-11* 14-13 14-15 14-17
• VX14 air cap.

Plural component metering and mixing for 2 or 3 part materials is simplified with manual or electronic controlled systems. Provides fresh and metered 1K, 2K or 3K mixed materials to the spray head. Manual pump systems provide fixed ratio from 2K (2 part) materials with a full flush feature for quick product change. CYCLOMIX™ materials, creating 1K, 2K or 3K material. Cost savings of lost aged material, reduced solvent usage and saved labor costs with increased quality of mixed material create fast machine pay-back. Please call for complete information on all available configurations.

Sold per system

• KR-CX-MICRO+ Component Management System (2-K with 3A+1B and flush) Call for Quote
• KR-CX-EXPERT Component Management System (3-K with 22A+22B+1C and flush) Call for Quote

PU2160F Spray Guns with H igh T ransfer I nnovation (HTI) and H igh P ower A tomization (HPA) are Kremlin Technologies. Applying a wide range of coatings, spray guns are available in suction, gravity and pressure versions. Kremlin has a large selection of air caps with needles and nozzle sizes to apply all types of material. Designed to feed most coatings in pressure feed applications. Stainless steel fluid passages and anti-stick coating makes this system easy to clean and maintain. Comes complete with 25 ft. each of air and fluid hoses and a

Sold per system/gun

• Great for small batch jobs and fast color changes. Aluminum cup construction is lightweight and easy to handle.
• Comes complete with 5 ft. each of air and fluid hoses and a F-PRO Conventional spray gun with 1.5 mm nozzle.

This spray gun delivers high finish quality and transfer efficiency with outstanding operator comfort. Equipped with a high efficiency and HVLP compliant air cap. Ergonomically designed, reducing the potential for operator

Sold per gun

• *Available while supplies last.

The new standard in Airspray. This patented innovative restrictor controls and pre-atomizes the paint into smaller droplets. Slowing down the paint speed and leaving time for the air cap to atomize paint at the perfect droplet size avoids bounce back onto the part, increasing transfer efficiency. The patented VORTEX spins the paint allowing a spray pattern. Perfectly balanced for reduced repetitive strain injuries. The F-PRO is an arm extension, creating a natural working tool for painters. Features reduced handle volume, making it ideal for operators with smaller hands. Elegant design, high quality metal, machining and anodization makes the F-PRO the ultimate spray gun F-PRO application solution.

Sold per gun

• VORTEX high level paint concentration onto complex-shaped parts. Features 3 different adjustment knobs to get the perfect

The FPRO high volume low pressure (HVLP) gun provides high transfer efficiencies while maintaining HVLP compliance. This gun works great for fast color changes. Features an ergonomic body design with reduced trigger pull. The unique air cap design provides for unsurpassed finish quality with a perfectly balanced fan pattern. Nozzle sizes available: 1.2, 1.3, 1.4, 1.5, 1.8, and 2.2 mm. Comes with a high density polyethylene (HPDE) gravity feed cup or can be used with the 3M PPS cup using a #6 adapter.

Sold per gun

The FPRO features high quality finish and unsurpassed operator comfort. Recommended for a large range of materials including stains and two-component coatings. Nozzle sizes available: 1.2, 1.3, 1.4, 1.5, 1.8, and 2.2 mm. Comes with a HPDE gravity feed cup or can be used with the 3M PPS cup using a #6 adapter.

Sold per gun

• FPRO G

All purpose, easy to clean paint spray gun with 1 quart capacity pot. Spray gun features a unique two-piece construction with an exclusive air valve design nozzle. Fully adjustable wide fan pattern control. Can be used with a 3M PPS cup using a #18 adapter.

Sold per sprayer

Economical all purpose spray gun with an adjustable wide fan pattern control. Comes with a plastic gravity feed cup or can be used with a 3M PPS cup using a #2 adapter.

Sold per gun

Conveniently hang your spray gun out of the way when not in use. Avoid spray booth clutter and save time by always knowing where to find your spray gun. Attaches magnetically or with screws.

Sold per holder

A completely new system for mixing and preparing finish material prior to spraying. This system replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. (Up to 70%) Consists of reusable cups and collars, and disposable liners and lids. Extremely simple to use and can improve operator efficiency up to 15%. A key advantage of this closed system is that it enables a spray gun to function at any angle, even upsidedown! When done using the system, the lid and liner can easily be removed and disposed without any outside contamination. When used with the Accuspray System HVLP Gun, it virtually eliminates any cleanup. Order cups and collars, lids and liners, dispensers and accessories separate.

Sold per box

Sold per box

Sold per case

Sold per insert

Sold each

An adapter will be required to begin using the 3M PPS System. Fits on existing spray gun to allow the PPS cup to be attached. PPS cup attaches and loosens with a simple twist and lock. Adapters available for all makes and models of guns. Let us know if you need help to determine your type of adapter. We would recommend the PPS 2.0 for any new systems.

Sold each

• *Available while supplies last.

Sold per box (4 nozzles per box)

A new much improved Performance Spray Gun. Building on the convenience of the original Accuspray gun, this gun has much improved nozzle and cup connection. The spraying performance is drastically improved, and rivals any gun without the clean up hassle that comes with traditional guns. Try one today! Can be used as a Gravity Feed Cup gun or a pressure feed gun for your pressure pot.

Sold per kit

• *Includes Spray Gun, air control valve, Pressure whip, Pressure and atomizing nozzles.

Sold per pack (5 per pack)

Sold per box (2 per box)

Sold per box (1 per box)

Sold per case (50 lids and liners)

Sold per case (25 per case)

An adapter will be required to begin using the 3M PPS System. Fits on existing spray gun to allow the PPS cup to be attached. PPS cup attaches and loosens with a simple twist and lock. Adapters available for all makes and models of guns. Let us know if you need help to determine your type of adapter.

Sold each

Excellent for cleaning spray gun equipment and helps reduce the use of cleaning solvents. Compatible for cleaning waterborne and solvent based coatings. Designed for use on metal and composite/plastic spray equipment.

Sold per can

A specially engineered adhesive-backed white material for temporary surface protection applications. Protects surfaces during manufacturing or maintenance. Works great to trap dust, dirt and overspray in paint booth applications. Low-tack adhesive for easy application and clean removal. Reduces paint booth cleanup and maintenance. Durable construction for traffic areas. Adhesive backed clear film protects lights and windows from overspray buildup. No more scraping and cleaning; simply peel offand re-apply. 36862 36862 36852 36852 Ask about a free dispenser available with your 2-roll purchase.

Sold per roll

• 36852
• 36851
• 36853 3M-36852 28" x 300' roll Dirt Trap material, white (floor and general surface protection) 1 roll

An economical, compact design, orbital drive pneumatic paint shaker. Light weight, yet strong enough to han- dle those occasional paint room jobs. Features fully adjustable locking rubber clamps. Shakes at 1110 cpm.

Sold each

Air powered 5 gallon agitator with stainless steel cover and nylon blades. Very sturdy construction.

Sold each

Cast aluminum swing-blade design fits through Flexspout pail openings and drum bung openings. Turbine- like teeth on top and bottom produce a tornado-like mixing action. Zinc plated steel shaft fits 1/2" drill chuck.

Sold per mixer

This zinc-plated steel agitator is specially designed to fit through center bung openings. Large surface area for thorough agitation of settled contents. Includes permanently attached 2" NPS steel bung adapter. 1/2" square

Sold each

• Shown with 901 handle.
• Lid not included .

We carry a wide variety of metal and plastic containers for all your finish and solvent needs. Plastic containers are ideal for products that won't work in metal containers such as catalyst and Permatone Dyes. All containers come with lids.

Sold each

Re-use your empty pails by using pail liners. Fits neatly and easily into all standard steel and plastic pails. R32N R16N R08N Contoured lid snaps over top rim of pail to prevent slippage. High-Density Polyethylene Liners have semi-rigid shape for easier insertion into the pail.

Sold per liner

Designed to fit quart/gallon metal and plastic containers to protect against spills and drips when pouring. One metal screw cap opening. Chemically resistent co-polymer polypropylene.

Sold per funnel

• 1116 side fits 28mm plastic neck finish and 1" metal screw top opening. Other side fits 38mm plastic neck finish and
• 2-PL-AS

A strong clear plastic measuring cup with graduated marks for ounces (in 1/2 ounce increments), cc and ml.

Sold per cup

• SNP-MIX Works well to mix and measure stain samples and holds up to most solvent based products.

A clear plastic measuring cup with graduated marks for 1/8, 1/4, 1/2, 3/4 and 1 ounce measurements. Also measures drams, cc's and ml. Works wonders to accurately measure in small quantities and holds up well to solvent based products.

Sold per cup

Easily draw and deliver repeatable, uniform drops. Works great for transferring and measuring small amounts of pigments, dyes, catalyst and etc. Low-cost, disposable pipettes have graduated mL markings and are a must- have in any paint kitchen.

Sold per pipette

• 06226-63

Glaze with precision when using a glazing bottle. Plastic bottle featuring a metal elongated tip with approximately .047 orifice, and plastic cover cap.

Sold per bottle

Handy for solvent or water for fast gun clean-up between coats or at the end of the day.

Sold each

• 1640GB

Easy-to-read mixing pitchers have ratios, ounces, quarts and milliliter graphics printed on them. Ratios include 1:1, 2:1:1, 3:1:1, 4:1:1, 5:1:1, 6:1:1 and 8:1:1. Handy for measuring and mixing multiple part finishes.

Sold per pitcher

Easy-to-use disposable cups and lids in a variety of popular sizes handle the full range of jobs, from touch-ups to full finishing jobs. These High-Density Polyethylene mixing cups come in the most popular mixing ratios. Environmentally smart and very economical. Order cups and lids separate.

Sold per cup

Sold per lid

Easy-to-use and disposable with mixing ratio graphs. Made of High-Density Polypropylene.

Sold per cup

Includes an assortment of mixing cups and lids ranging in size from 1/4 pint to 5 quart, including lids plus 1 lter lid. Also includes a 2 oz. Touch-up Bottle, paint strainer, Touch-N-Go Applicator, Touch-Up Brushes, E-Z Dabber, Spreader, Wooden Paint Stick, Color Match Card and metal can opener.

Sold per assortment

Paint mixing bucket with lid for the big jobs.

Sold per bucket

Mixing sticks for most any type of stain, paint or varnish. Economical enough to throw away after use. These wooden mixing sticks have a smooth finish making them splinter free.

Sold per stick

Holds up to most any solvents and finishes. The 8" slotted stick works great for mixing small batches with twice the mixing power when compared to the unslotted sticks.

Sold per stick

Great for many uses including stain samples and touch-up stains and paints. Touch up bottles are made of HDPE shatterproof plastic and feature a child safety lid. Each bottle comes with a mixing ball and lid with an extra long brush. Clear bottles come with clear stick-on labels.

Sold per bottle

• 10002 70002

Handy applicator syringes with many uses. From wood finishing to the home hobbyist. Works great for fine details.

Sold per kit

Another precision applicator that saves time and money. Use to apply paint, adhesives, lubricants, etc. Let's you put the product where you want it.

Sold per tube

• 76000

An economical and useful applicator for hundreds of jobs. This dabber is flexible and features a tapered head for

Sold per dispenser

• 78000 precise application and lint-free nylon fiber tip.

Handy to have around especially in the finish room. For leveling uneven surfaces and numerous other uses. Not as aggressive as metal blades.

Sold per box

• 56100

E-Z Mix Lab Coats are designed with carbon threading to dissipate charges in the spray booth. They feature a detachable hood, venting, and are light weight, breathable material. These coats run small in size, so you may want to order a size bigger than with other lab coats.

Sold per lab coat

Sold per box

• Great for stain application and to wipe offexcess. Also great for shop use or wiping away excess glue.

These 8 mil. powder-free staining gloves will outlast most other gloves on the market. Duraskin nitrile glove provide protection from a variety of chemicals including paint rooms and solvents. Available in box quantities.

Sold per box